Files Monitored
RSM permits monitoring for file presence, size, and version. File monitoring generates State–of–Health status and alerts. The Files Monitored section is displayed only if files are being monitored.
Monitoring Files
To monitor a file, follow these steps:
1.On the OS Monitoring section, select Add. The Add window is displayed.
2.Select File, and then select OK. The system displays the Add File window.
3.Enter the following parameters:
|
Parameter |
Definition |
|---|---|
|
File Name |
Refers to the name of the file that you want to monitor. |
|
Path |
Refers to the directory path of the file that you want to monitor. |
|
Presence |
Refers to the type of monitoring that you want, which can be any of the following: •Not Monitored—indicates that the presence of the file is not monitored. •Present—indicates that you want to make sure the file is present. •Not Present—indicates that you want to make sure the file is not present. |
|
Maximum File Size |
Refers to the maximum file size for the file before an event is triggered. Zero disables maximum file size monitoring. |
|
Version |
Monitors the version of the file to verify that the correct version is present. Leaving it blank disables version monitoring. |
4.Select Add. The Files Monitored section indicates that the file is added for monitoring.
To stop the monitoring for a file, select the line containing the name of the file, and then select Remove. Confirm the removal by selecting OK.
